Mtl Dsg	Mark Dsg	Coat Type			ANSI	Temp Class ℃
		BC	OC	BOND
xUEW180 (&) (a)	(1)	Polyurethane	—	—	MW82	180
xUEW155 (&) (a)	(1)	Polyurethane	—	—	MW79	155〔#〕
xUEW or UEW130 (&) (a)	(1)	Polyurethane	—	—	MW75	130〔#〕
xUEW-Y180 (&)( a)	(1)	Polyurethane	Polyamide	—	MW83	180
xUEW-Y155 (&)( a)	(1)	Polyurethane	Polyamide	—	MW80	155〔#〕
xUEW-Y130 (&) (a)	(1)	Polyurethane	Polyamide	—	MW28	130〔#〕
xFEIW or SEIW180 (&) (a)	(1)	Polyamide	—	—	MW77	180〔#〕
xPSFW or SPEW155 (&) (a)	(1)	Polyamide	—	—	MW26	155〔#〕
xPEW/130 (&) (a)	(1)	Polyamide	—	—		130〔#〕
xSBUEW 180 (&)(a)	(1)	Polyurethane	—	Polyamide		180
xSBUEW 155 (&) (a)	(1)	Polyurethane	—	Polyamide	MW131	155
xSBUEW 130 (&) (a)	(1)	Polyurethane	—	Polyamide	MW130	130
xSBUEW 120 (&) (a)	(1)	Polyurethane	—	Polyamide		120
xEIW 200 (&)(a)	(1)	Polyester-imide	—	—	MW74-C	200
xEIW 180 (&)(a)	(1)	Polyester-imide	—	—	MW30-C	180〔#〕
xEI/AIW 220 (&)(a)	(1)	Polyester-imide	Polyamide-imide	—	MW37-C	220
xEI/AIW 200 (&)(a)	(1)	Polyester-imide	Polyamide-imide	—	MW35-C, MW73-C, MW36-C	200〔#〕
xAIW 220 (&)(a)	(1)	Polyamide-imide	—	—	MW81-C	220
xAIW 200 (&)(a)	(1)	Polyamide-imide	—	—		200〔#〕
xPIW 240 (&)(a)	(1)	Polyimide	—	—	MW16-C	240
xPIW 220 (&)(a)	(1)	Polyimide	—	—		220〔#〕

 

(&) May have a suffix / rectangular size / to denote the wire is also suitable for rectangular magnet wire.
x May be prefixed by 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 to indicate coating thickness.
(a) – May be prefixed by LZ, LZL, USTC, UDTC, EL(BL), USAC, UDATC, UDHTC, pUSHTC, ML, EW.
Whareas :

LZ – Signifies magnet wires twisted together;

LZL – Signifies base coated magnet wire twisted together aand covered with top coat overall;

USTC – Include single layer polyester filament yarn covering;

UDTC – Include double layer polyester filament yarn covering ;

EL(BL) – signifies base coated magnet wire laid parallel with top coat applied overall.

USAC – Include one layer bondable filber cover.

UDATC – Include one layer of normal fiber cover and another bondable fiber cover.

UDHTC – Include one layer of normal fiber cover and another bondable fiber cover by hot air.

pUSHTC – Include pre-bonded heat bonding litz wire.

ML – Include litz wire with Mylar cover.

EL – Include litz wire with extruded PA jacket.
+ ANSI type applies to round magnet wires.
〔#〕This magnet wire may perform better than rating reflects and hence may not be suitable for an insulation system thermal aging program.
*may be suffixed by 0, 1, 2, 3 to indicate coating thickness.