Round copper magnet wire

Low temperature solderable minuteness ployurethane round copper magnet wire Solderable ployurethane round copper magnet wire.

We produce thin , minuteness, and special magnet wire, main divided way is fromφ0.015mm toφ0.500 mm, and our annual output is about 3000 tons.

The ployurethane round copper magnet wire(UEW class 130/155/180℃ MW75, MW79, MW82), the wire coated with nylon(UEW/Y class 130/155/180℃ MW28, MW80, MW83) or the selfbonding wire adhered with heat (SBUEW), beside the nature color, other color available in red, green. Our wires are wildly used in relay, micro motors, small transformers, all kinds of car transformers and network transformers, instruments and meter coils, watch coils, printer coils, engines of logging winch axial seal.

there are 5 pinholes/5M is IEC’s standard. We can provide the specification changed upon the customer needs. For example: reduce the pinhole, thick or thin the coating of the wire and so on.

Article	Appearance	Conductor Dia.	OUT dia	Coating thickness	Salted pinhole		Conductor resistance	Breakdown voltage	extension	Frictional coefficient
2UEW-F0.035	Clear Even color	0.035 ± 0.001mm	Max 0.045mm	Min 0.006mm	Normal 5m	3%extension 1m	17.12-18.44Ω∕m （20℃）	350V以上	11%以上	< ∕tg a
					Below 5pcs	Below 5pcs
2UEW-F0.030	Clear Even color	0.030 ± 0.001mm	Max 0.039mm	Min 0.006mm	Normal 5m	3%extension 1m	23.20-25.23Ω∕m （20℃）	350V以上	11%以上	< ∕tg a
					Below 5pcs	Below 5pcs

 

Features And Typical Applications

Typical Applications：
Small motor, relay, small transformers, watches, coils, magnet heads

Features：

Solderable without prior removal of the film.

Suitable for high speed winding equipments

Colorable

Packing weight requirements

Nominal Diameter (mm)	Line dish type	Standard Weight(g)
0.018~0.025	KK63	250
	KK80	400